components product information connector new mb-0271-1 april 2014 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 1/7 ? no. of contacts: 6 pos. + 2 pos. (d-sw) ? contact resistance: 100m ? max. (initial) ? dielectric withstanding voltage: ac500vr.m.s for 1 minute ? operating temperature: -40 deg. c to +85 deg. c ? rated current: 0.5a per pin ? rated voltage: 10v per pin ? insulation resistance: 1,000m ? min. (initial) ? durability: 5,000 times ? tray insertion force: 10n max. SF58 series microsim card connector <> smartphones and tablet pc equi pping microsim (mini ui cc) cards are increasing. the SF58 series is a push-eject type (eject ed by pushing pin) connector compatible with the micro sim card. (sim: s ubscriber i dentity m odule) ? 1.3mm height, 15.5mm width, and 16.35m m depth, low-profile, space saving. ? card mis-insertion measures, with c ard detection switch (normal open). ? structure that enables visual check of terminal area after smt mounting. ? superior resistance against drop with original lock structure. ? pb-free, halogen-free compliant product. ? supports automated mounti ng with embossed tape. rohs compliant note: tray is not included. tray is to be prepared by customers. features general specifications
mb-0271-1 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 2/7 how to eject tray 1. insert a pin into the hole on the tray straightly. hole pin 3. pull the end with finger tips and draw out a tray. micro sim card tray note: tray is not included. tray is to be prepared by customers. 2. push a pin in until a tray ejects.
mb-0271-1 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 3/7 SF58 s 006 v b b (r2000) series connector type s: non-zif structure no. of contacts reeled part number (note) modification code plating specification b: contact area: au / connection area: au flash plating connection type v: smt mounting, with h/d note: an embossed tape reel contains 2,000 pieces. please contact us concerning packaging specifications. component material and finish signal contact d-sw contact main frame copper alloy / contact ar ea: au plating over ni terminal area: au flash plating over ni housing synthetic resin / none cover frame stainless steel / te rminal area: au flash plating eject bar stainless steel / none eject lever stainless steel / none materials and finishes ordering information
mb-0271-1 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 4/7 unit: mm part number drawing number SF58s006vbb sj114918 note3. vacuum area note4. lot information is shown as below e.g. 4303 1 production line no. production date (ymdd)
mb-0271-1 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 5/7 unit: mm recommended tray note 1: above are recommended dimensions for tray designed by customers. note 2: above drawing are for reference only. please refer to the most updated drawing when considering use of this product. 11.24 15.13
mb-0271-1 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 6/7 unit: mm appplicable p.c.b. dimensionref. m?
mb-0271-1 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 7/7 drawing number technical document no. product drawings individual product: sj114918 reel product: sj114919 specification jacs-10982 handling instruction jahl-10982 product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2882 fax: +81-3-3780-2946 * the specifications in this brochure are subject to change without notice. please contact jae for information. notice: 1. the values specified in this brochure are only for reference. the products and their specifications are subject to change wi thout notice. contact our sales staff for further information be fore considering or ordering any of our products. for purchase, a product specification must be agreed upon. 2. users are requested to provide protecti on circuits and redundancy circuits to ensure safety of the equipment, and sufficient ly review the suitability of jae's products to the equipment. 3. the products presented in this brochure are designed for the uses recommended below. we strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommend ed applications or for a specific use that requires an extremely high reliability. (1) applications that require consultation: (i) please contact us if you are considering use involving a qua lity assurance program that you specify or that is peculiar to the industry, such as: automotive electrical components, train cont rol, telecommunications devi ces (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) we may separately give you our s upport with a quality assurance program that you specify, when you think of a use such as : aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2) recommended applications include: computers, office appliances, telecommunications devices (termina ls, mobile units), measuring e quipment, audiovisual equipment, home electric appliances, factory automation equipment, etc
|
